05 Oct 2015

Borg Design Grows Green Initiatives

General News & Announcements No Comments

EES Certified Green Building LogoIn the past month we’ve been taking small steps to lessen our environmental impact by reducing waste and conserving electricity. Last month we took our biggest step yet by implementing a full energy efficiency upgrade. We overhauled energy-consuming equipment throughout the facility, and installed controls that ensure our equipment runs at maximum efficiency.

Because of all these changes, we’re expected to save a whopping 81,685 kWh of electricity this year – that’s enough to power 8 homes for one year!! We’ve cut our total electricity consumption by 35%, which means we’ll be saving big bucks on our electric bill. With the rising cost of materials, these improvements will allow us to keep your costs low and continue providing the superior service you’ve come to expect from Borg Design.

Contact us to learn more about our conservation initiatives and about how Borg Design can help you with all your CNC machining and production needs.

25 Mar 2015

Borg Design Spurs Hiring

Engineering News, General News & Announcements No Comments

Borg Design was recently featured in an article by Jack Healy, Director of Operations, MassMEP. In the article, Mr. Healy discusses an interview with key management of the Borg Design team. The interview covers the challenges a company like Borg Design faces as it grows, its hiring practices and more.

A key focus of the article is regarding the ability to find well skilled labor. An excerpt is below.

“Borg Design utilizes state of the art CNC machining equipment to make molds and parts with complex surfaces. Andrew Borg, President of Borg Design, stated, “The most difficult part of our expansion was to find skilled machinists that can do the demanding work that we do. Our employees need to be able to offer solutions along with their work.” He said that they had placed ads for machinists, but got no responses.”

Read the full article here.

About Borg Design: Borg Design is a CNC machining and manufacturing business located in Hudson, MA. Borg Design has recently opened a brand new, state-of-art facility with 58,000 square feet of space. More information on Borg Design services is available here wich contains an ultimate guide to gel pens as well.

10 Nov 2014

K. Andrew Borg Interview with Worcester Business Journal

Engineering News, Special Projects No Comments

Borg Design President, K. Andrew Borg gave a Q&A interview with the Worcester Business journal recently. You can read the full article here.

There’s been a lot of action going on at Borg Design and Borg Tattoo with a new building right around the corner, tons of new projects, new machines and more. Andrew talks about some of them, the challenges of growing as a small business and a bit about his background in the video below, courtesy of Worcester Business Journal.

22 Oct 2014

Borg Design Featured in Worcester Business Journal

Engineering News, Front Page Spotlight Project No Comments

There’s big new brewing over at Borg Design. We’ve purchased a new building and are preparing fi for a big move! That’s right, we’re going to be moving to a state-of-the-art facility that will allow us to increase the amount of machines we have, the production capacities and the design and engineering capabilities of Borg Design.

See more about this move on the Worcester Business Journal website. Here’s an excerpt.

Hudson firm buys building, will move within town

A Hudson machining and engineering consulting services provider will be moving elsewhere in town as it plans to expand.
Borg Design Inc., founded in 1945, will move from its current site on Apsley Street to 19 Brent Dr. – about four miles east – after it bought the site for $1.35 million, according to O’Brien Commercial Properties, which brokered the deal.

See the complete article here.

03 May 2012

Borg Design is now on Facebook, Twitter and Instagram

General News & Announcements No Comments

We at Borg Design have been working hard to make sure our customers have access to the most up to date information about Borg Design.  We have created our brand new website with the help of Tim Robb wich had the pleasure to present us the best portable grill released lately.

We have our facebook fan page at https://www.facebook.com/BorgDesignInc  please check us out and like us.

We also have our twitter up at @borg_design so you can follow any interesting happenings, so please follow us.

Just recently we have also added Instagram, check us out @borgdesign.  It is a great place to see some of the cool and interesting parts we are working on.

We are always trying to post interesting and important information about what Borg Design is doing, equipment and employees we are adding to help better serve our customers as well as any other important information to help our customers and friends better understand the way in which we can help them.

02 May 2012

Surface Machining at Borg Design in our Haas CNC

Engineering News No Comments

We surface the bluetooth showerhead and a machine that has many different types of parts like crank handles, etc. This is when we mill complex 3D surfaces that can not be cut by traditional CNC machining methods. This is being machined on our Haas Super Mini Mill 2. These programs can contain millions of lines code.

01 Mar 2012

Proud Manufacturer of Borg Tattoo Machines

Special Projects No Comments

Borg Design is proud to manufacture the Borg Tattoo Machine.

This high quality and consistent Tattoo Machine is constructed with our unique one piece light weight and balance frame. Our coils are hand wound and assembled for a beautiful and strong machine that is capable of pushing any needle combination you need.

Please check out Borg Tattoo’s website at www.borgtattoo.com